Com-Power model CGO-5100A Comb Generators is a broadband EMC signal source for quick EMC site testing. It radiate signals up to 18 GHz at 100 MHz frequency steps. EMC labs calibrate their radiated emissions test sites, instrumentation and accessories at least once a year. The calibration procedures are elaborate and time consuming. However, calibration does not prevent equipment malfunction in between calibration period such as damaged receivers, broken cables, poor connections, bad antenna, etc. For example, as the frequency increases poorly mated connector can cause significant measurement errors. Monitoring a few frequencies regularly on the Comb Generator's broadband radiated output can verify the entire setup quickly and efficiently. Any potential problems with the test setup can be detected before it causes erroneous results. It is powered by a rechargeable NimH battery pack. It has circular shape for more uniform radiated output.

pdf datasheet

Frequency:	1 GHz - 18 GHz
Application:	EMI Radited Site Reference Source
Frequency Step Size	100 MHz
Antenna:	Built in
Power:	3.6 V NimH Battery
Charger input:	7.5 VDC, 500 mA
Output connector:	Not Available
Weight:	2 lbs /0.9 kg
Size:	7 × 0.75 inches / 17.7 ×1.9 cm