The LISNs are intended for EMI conducted emissions testing. The LISN model LIN-115 is placed between the power source and the EUT (Equipment Under Test) to stabilize line impedance, provide a 50 ohm RF connection, and block unwanted RF noise from the external power source. The LIN-115 uses air coils in the current path in order to avoid saturation due to high current. This model can handle up to 15 A of current. It was designed to test products according to FCC Part 15, CISPR 22 and EN standards.

The LIN-115 has two networks housed in a single enclosure for single phase testing. It also has built in transient limiter to protect receiver input during conducted emissions measurement. It has Euro power socket for EUT power connection on the front panel for convenience. A Euro socket can be converted to US type sockt using the adapter shipped with each unit.

pdf datasheet

Frequency:	150 kHz - 30 MHz
Application:	FCC,,CIPSR, EN
Max Current (Amp):	15 A
Voltage:	115/ 270 VAC, 380 VDC
Inductor:	50 µH
Inductor type:	Air Core
Number of lines:	2 Lines + Ground
Output impedance:	50Ω
Output Connector:	N type (f)
Power source frequency:	DC-60 Hz
Power Connector:	Euro socket with US plug adapter
Weight:	17 lbs. / 8 kg
Size:	35.5 x 17.7 x 33. cm / 14 x 7 x 13 inches