SPECTRUM ANALYZERS FOR EMI /EMC TESTING AND TROUBLESHOOTING.

Solving EMI/EMC problems in electronic products can be expensive and time consuming. Com-Power Spectrum Analyzer models SA-512.2 and SA-514.2 are feature rich and are the most affordable in its class for performing EMC testing. They are suitable for engineers for conducting preliminary Electro Magnetic Compatibility (EMC) product testing to meet the various global regulatory requirements. These analyzers are lightweight and portable. The engineer can use these analyzers in combination with Com-Power antennas, near field probes and LISNs to locate the source of the EMI radiation right at the factory. Therefore, reducing valuable time expense associated with going back an forth to a commercial EMC test lab for troubleshooting and testing.

All the basic functions of the spectrum analyser are easily accessible using the keypad the front panel. The processor controlled digital screen can display selected frequency settings and the marker values. The measurements can shown on the screen can be captured, stored or printed using the supplied free limited version of the AS200 software. The *AS200 also has built in EMC measurement capabilities such as Quasi Peak and automated radiated and conducted emissions testing . To access these features require software key. This key must must be purchased seperately. Instruction will be provided with the documentation. The software uses the built in RS-232 interface for PC communication. The SA-514.2 spectrum analyzer has built in tracking generator.

* AS200E is a limited version. A software license key is needed to acees all the EMC functions. The key must be obtained directly from the software publisher. Instructions will be provided with spectrum analyzer documentation. Com-Power does not own the rights to this software, therefore cannot provide direct support or quote current price. Technical supportand price must be obtianed from the publisher. Com-Power will be provide assistance if necessary to obtian support.

Model	SA-512.2 / 514.2
Frequency range:	150 kHz to 1050 MHz
Resolution bandwidth (RBW)	9 kHz, 120 kHz, 1 MHz
Video bandwidth (VBW):	4kHz
Sweep rate (fixed):	40ms, 320ms
Amplitude range::	-100 dBm to + l0 dBm
Average noise level	-100 dBm (9 kHz BW)
Tracking Generator	Yes (SA-514.2 only)
PC Interface	RS-232

 

114 Olinda Drive, Brea, California 92823, U.S.A