CDN 4 wire Unscreened Audio Frequency

Testing products that use four wire unscreened cables
CDN-AF4E Coupling Decoupling Network is designed for conducted immunity per IEC / EN 61000-4-6. The CDN-AF4E is made for data communication.
It has four 2 mm shrouded banana sockets for both EUT and AE power connection.
The CDN-AF4E can handle up to 5 Amps of current.
The RF disturbance signal coupling port is female BNC. It can handle up to 40V of RF Input Voltage.
The bottom surface of the CDN is not painted for easy and effective grounding.
The Com-Power CDN-AF4E fully complies with the requirements contained in the IEC 61000-4-6 and CISPR 16-1-2.
All Com-Power CDNs can be purchased as part of the CIS series conducted immunity test systems or separately. This is a pre-packaged solution that includes an ACS series power amplifier and all accessories required for the test.

Frequently bought together

ACS-250-100W broadband power amplifier + Add

SPA-900TG Series spectrum analyzer + Add

CGO-515 comb generator + Add

Product Name: Coupling Decoupling Network (CDN)
Compliant Test Standards: IEC / EN 61000-4-6
Application: Four wire unscreened, unbalanced Cables
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
Current Rating: 5 Amp (Max)
AE and EUT Connections: 2 mm shrouded banana sockets
Common Mode Impedance:
- 150 kHz - 26 MHz: 150Ω ± 20Ω
- 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω
- 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
- Voltage Division Factor: 9.5 dB +3 / -1
- Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches or 15.2 x 15.2 x 33 cm
Weight: 5 lbs. or 2.3 kg
Accessories Available from Com-Power for setting test levels and running the test:
- ADA-AF4E shorting adapters
- ADA-515-2 150 Ω to 50 Ω adapters
- TEP-050 50 Ω Terminator
- ATTN-6-100W Power Attenuator
- DCU-300-100W Directional Coupler
- ASC series Power Amplifiers