Broadband Power Amplifier: For Conducted Susceptibilty
-
RF Power Amplifier for EMC Testing:
Specifically designed for IEC 61000-4-6 conducted immunity testing in compliance and pre-compliance labs. -
Frequency Range from 150 kHz to 230 MHz:
Broad spectrum coverage ideal for various conducted RF test applications and setups. -
25 Watts Output into 2:1 VSWR Load:
Delivers required power levels for standard EMC test levels using compatible CDNs and accessories. -
High Gain Performance (43 dB ±2):
Requires only 0 dBm input for full-rated output; ensures efficient RF signal amplification. -
Automatic Safety Shutoff Protection:
Built-in shutoff activates at 30W or under mismatch conditions; protects amplifier and test systems. -
Low Harmonic Distortion (–20 dBc at 25W):
Produces clean RF signals; ensures reliable and accurate EMC test measurements. -
LCD Front Panel Display:
Displays real-time current, temperature, input/output power, VSWR, and gain for easy monitoring. -
USB Interface for Automation:
Supports software integration to automate IEC 61000-4-6 testing workflows and data collection. -
Compact 2U Rack-Mount Design:
Fits 19-inch racks with integrated forced-air cooling; ideal for space-efficient lab environments. -
Three-Year Manufacturer Warranty:
Each unit is individually tested and backed by Com-Power’s trusted 3-year product warranty
-
Broad Frequency Coverage (150 kHz–230 MHz): Ideal for IEC 61000-4-6 testing; supports a wide range of EMC applications.
-
25 Watts Rated Output Power into 2:1 VSWR: Delivers strong output; meets standard test levels with ease.
-
High Amplifier Gain (43 dB ±2): Efficient signal amplification; needs only 0 dBm input.
-
Automatic Safety Shutoff at 30 Watts: Protects the amplifier; shuts off during overload or mismatch.
-
Designed for IEC 61000-4-6 Compliance: Fully meets test standards; ideal for compliance and pre-compliance setups.
-
Low Harmonic Distortion (–20 dBc at 25 Watts): Produces clean signals; ensures accurate test results.
-
Front Panel LCD Display: Shows current, temperature, and RF power; easy to monitor during testing.
-
USB Interface for Automation: Supports test software; enables automated immunity testing.
-
Compact 2U Rack-Mount Size: Fits standard racks; includes internal fan for cooling.
-
Three-Year Manufacturer Warranty: Provides long-term reliability; each unit is fully tested before shipping.
Frequency Range: 150 kHz to 230 MHz
- Rated Power Output: 25 watts into 2:1 VSWR
- Gain : 43 dB ±2 dB
- Input for rated output : 0 dBm (typical)
- Automatic Safety Shut-off: 30 watts ± 2
- Power Output @ 1 dB Compression Point: N/A
Input:
- Impedance : 50 ohms (nominal)
- VSWR : 1.7 (maximum)
- Input Signal Modulation Compatibility:: AM, FM, or Pulse modulation
- Connector: Type N on Front Panel
Output:
- Impedance : 50 ohms (nominal)
- VSWR : 1.7 (maximum)
- Harmonic distortion : -20 dBc at 25 watts
- Mismatch Tolerance: Automatic Safety Shut-off @ VSWR >7
- Connector : Type N on Front Panel
Power:
- AC, Single Phase: 100-240 VAC 50/60 Hz
Display and Interfaces:
- Front Panel Display (Column 1): Amplifier Current measurement Data
- Front Panel Display (Column 2): Amplifier Temperature measurement data
- Front Panel Display (Column 3): Load VSWR, RF Power Input/Output, Gain
- Remote Interlock (optional) : 2-pin DIN
Mechanical:
- Cooling : Forced air (self-contained fans)
- Size: 19” Rack 2U
- Weight : 25 lbs (11.3 kg)
- Operating Temperature Range: 0° C to +40° C
