Antenna Mast and Turntable Controller
- ▸ AMTTC-300 Antenna Mast and Turntable Controller for automated EMC radiated testing — provides fully automated control of Com-Power antenna masts and turntables for radiated emissions and immunity measurements.
- ▸ Multi-device control with up to three independent channels — a single controller drives an antenna mast, a turntable, and a third positioner simultaneously, streamlining radiated EMC test setups.
- ▸ Manual front-panel control from the test area — operators can position the turntable or antenna mast directly from the chamber using the front panel and 16 × 2 alphanumeric LCD.
- ▸ Full PC automation via USB 2.0 interface — the controller is programmable from a personal computer using a complete documented command set, enabling automated height scans and turntable rotation during compliance testing.
- ▸ Fiber-optic interface eliminates RF noise — duplex POF (plastic optical fiber) links to the antenna mast and turntable keep the control path immune to RF interference in the test chamber, with a 10 m crossover cable standard (up to 30 m optional).
- ▸ Variable speed control for the turntable — adjustable rotation speed gives precise control during azimuth scans and dwell positioning for radiated emissions and immunity tests.
- ▸ On-site calibration of antenna mast and turntable — built-in software limits, always displayed on the front panel, can be enabled or disabled from the panel or PC software for safe positioning and field calibration.
- ▸ 19" 3U rack-mountable design with a three-year warranty — integrates cleanly into EMC test racks alongside spectrum analyzers and receivers, running on universal 100–250 VAC input.
AMTTC-300 Features
- ▸ Antenna mast and turntable controller — fully automated control of Com-Power masts and turntables
- ▸ Multi-device control — up to three independent channels
- ▸ Variable speed control for the turntable
- ▸ Fiber-optic interface with antenna mast and turntable — eliminates RF noise
- ▸ Full control through front panel or PC software
- ▸ USB 2.0 PC interface — programmable with a complete documented command set
- ▸ 16 × 2 alphanumeric LCD display
- ▸ Software limits always displayed on the front panel — toggle via panel or PC software
- ▸ Allows on-site calibration of antenna mast and turntable
- ▸ 19" 3U rack-mountable
- ▸ Three-year warranty
AMTTC-300 Specifications
| Parameter | Specification |
|---|---|
| Model | AMTTC-300 |
| Type | Antenna mast and turntable controller |
| Channels | Up to three independent channels |
| Channel Interface | Fiber optic via Duplex VL (Avago duplex latching POF versatile link jack) |
| Fiber Optic Cable | 10 m VL/VL duplex crossover POF (up to 30 m optional) |
| PC Interface | USB 2.0 |
| Operation Control | Front panel or PC software |
| Display | 16 × 2 alphanumeric LCD |
| Software Limit | Always displayed on front panel; on/off via front panel or PC software |
| System Input Power | 100–250 VAC, 50/60 Hz (100 VA max) |
| Fuse Type | 1 A (T) |
| Operating Temperature | 40°F to 104°F (5°C to 40°C) |
| Dimensions (H × W × D) | 7.75" × 19" × 13.5" (19.7 × 48.3 × 34.3 cm), excluding handles |
| Mounting | 19" 3U rack mountable |
| Weight | 13 lbs (5.9 kg) |
| Warranty | 3 years |
Integration: The 19" 3U rack-mountable chassis fits standard EMC test racks and supports on-site calibration of the connected antenna mast and turntable.
Quote Request
Other EMC Test Equipment
- Absorbing Clamps
- Antenna Kits
- Antenna Masts - Automated and Manual
- Antennas
- Bulk Current Injection probes
- CDNs - Coupling Decoupling Network
- Comb Generators
- Conducted Immunity Test Systems
- Current Monitor Probes
- Current Probe Calibration Fixtures
- EM Clamps
- Feed Through Capacitor
- ISNs - Impedance Stabilization Network
- LISNs - Single Phase
- LISNs - TEMPEST
- LISNs - Three Phase
- Magnetic Field Generator
- Near Field Probes
- Power Amplifiers
- Pre-compliance Emissions Test Systems
- Preamplifiers
- Spectrum Analyzers
- Surge Generators
- System Controllers
- Transient Limiters
- Tripods For EMC
- Turntables