Impedance Stabilization Networks (ISN)

Com-Power ISN (Impedance Stabilization Network) are primarily used for RF telecom conducted emission testing per EN 55022, which is one of the EMC (Electromagnetic Compatibility) phenomenon tests...

ISN-T2 Telecom Lines

ISN-T2

Com-Power ISN (Impedance Stabilization Network) are primarily used for RF telecom conducted emission testing per EN 55022, which is one of the EMC (Electromagnetic Compatibility) phenomenon tests typically required for “CE-mark” compliance testing of commercial products. ISNs are used for measurements of conducted common mode disturbances of Telecom equipment. They are placed between the Equipment Under Test and the Auxiliary Equipment which is required for the EUT to function properly.

View Product

ISN-T8 Telecom Lines

ISN-T8

Com-Power ISN (Impedance Stabilization Network) are primarily used for RF telecom conducted emission testing per EN 55022, which is one of the EMC (Electromagnetic Compatibility) phenomenon tests typically required for “CE-mark” compliance testing of commercial products. ISNs are used for measurements of conducted common mode disturbances of Telecom equipment. They are placed between the Equipment Under Test and the Auxiliary Equipment which is required for the EUT to function properly.

View Product

CDN-T8SE coupling decoupling network

CDN-T8SE

The CDN-T8SE could be referred to as a “dual-threat” network, as it can be used either as a CDN for conducted immunity testing per IEC 61000-4-6, or as an ISN for conducted emissions testing per CISPR 22/32. It meets all applicable requirements of these standards for each test, as well as those contained within CISPR 16-1-2.

View Product

CDN-C50E coupling decoupling network

CDN-C50E

The CDN C50E is intended for use as either a CDN for conducted immunity testing per IEC 61000-4-6, or as an ISN for conducted emissions testing per CISPR 22/32. It meets all applicable requirements of these standards for each test, as well as those contained within CISPR 16-1-2.

View Product

CDN-C75E coupling decoupling network

CDN-C75E

The CDN C75E is intended for use as either a CDN for conducted immunity testing per IEC 61000-4-6, or as an ISN for conducted emissions testing per CISPR 22/32. It meets all applicable requirements of these standards for each test, as well as those contained within CISPR 16-1-2.

View Product