Model #: ISN-T8
Stock #: ISN-T8-10
- ▸ Impedance Stabilization Network, 150 kHz–30 MHz — measures common-mode disturbance voltage on unshielded balanced telecom ports with up to four pairs.
- ▸ Per CISPR 22 Figure D.3 / CISPR 32 Figure F.8 circuit topology — complies with CISPR 16-1-2, CISPR 22, and CISPR 32 for conducted telecom emissions.
- ▸ D-sub 25-pin EUT and AE ports with RJ-45 or RJ-11 interface options — D-sub on the ISN mates to an external LCL adapter (EUT side) and connecting adapter (AE side), so one ISN serves multiple cable categories and connector styles.
- ▸ Unshielded Ethernet ports on ITE and consumer electronics — PCs, network appliances, IP phones, set-top boxes, and access points with unshielded Cat. 5/5e/6 jacks.
- ▸ Analog and digital telephony with multi-pair drops — key systems, PBX line cards, and 25-pair amphenol-style telephony connections.
- ▸ Low-speed industrial and building-automation links — RS-485 / Modbus, BACnet MS/TP, and similar multi-pair unshielded balanced signaling.
- ▸ 50 Ω BNC RF port on top of network — direct mate to spectrum analyzer / EMI receiver during emissions scans.
- ▸ 800 mA per line / 1.6 A per pair, 100 V DC / 64 V AC line-to-ground — individually calibrated; pairs with the Com-Power SPA-900TG series spectrum analyzer / EMI receiver.
