Active Loop Antenna for EMC Test

Model AL-130R with Built-in Battery-Operated Preamplifier

9 kHz to 30 MHz

active loop antenna

Active Loop Antenna for EMC Test

  • The Model AL-130R is compliant with CISPR 16-1-4.
  • It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more.
  • The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio.
  • As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing.
  • Com-Power’s Remote Antenna Interface (RAI-100) comes in very handy for this application. It is a compact controller which can be used to enable/ disable RF measurement circuits and to monitor saturation and battery low conditions remotely via a fiber optic cable up to 30 mtrs in length.
Frequently bought together
  • Frequency Range: 9 kHz - 30 MHz
  • Built-in, Battery Operated Preamplifier
  • Fiber Optic Remote Monitor/Control option
  • Electric or Magnetic Field Measurements
  • Individual Calibration per IEEE 291 Included
  • Three-year Standard Warranty
  • Product Name: Active Loop Antenna
  • Frequency Range: 9 khz to 30 MHz
  • Loop Size: 19" x 19" (0.5 m x 0.5 m)
  • Nominal Impedance: 50 Ω (output port)
  • Battery Type: 6 VDC NimH (rechargeable)
  • Average Battery Life: 10 - 12 Hours
  • E-Field Antenna Factors: 13.4 to 16.4 (average: 14-9) [dB(m-1)]
  • Saturation Level: >1 V/m / >120dBμV/m (>2.65 mA/m) / >68.5 dBμA/m
  • Antenna Factor Variation: ±1.5 dB
  • RF Connector: BNC-type (female)
  • Specifications: ANSI C63.4, CISPR, EN, ETSI, etc.
  • Dimensions (H x W x D): 20.1" x 19.7" x 10.6" [51 x 50 x 27 cm]
  • Weight: 5.5 lbs. [2.5 kg]

chart


Image

Quote Request

Select Products

Promotional Code is for current offers only. https://www.com-power.com/current-offers
5 + 7 =