Model #: ALT-930-2M
Stock #: ALT-930-2M-10
- The ALT-930-2M is a Van Veen Triple Loop Antenna (Loop Antenna System) for CISPR 15 / EN 55015 radiated disturbance measurements of lighting equipment from 9 kHz to 30 MHz, designed per CISPR 16-1-4 Annex C.
- Three mutually perpendicular 2-meter diameter loops (X / Y / Z axes) capture magnetic field emissions in all three orthogonal axes — no EUT rotation needed.
- Loops are RG-223/U coaxial cable inside flexible 1″ PEX pipe, supported by a fiber glass / plastic structure on swivel casters for easy mobility without disassembly. 50Ω BNC female I/O.
- Integrated CS-450 four-channel coaxial switch selects the active loop while terminating the other two into 50Ω. Local front-panel control or remote operation via fiber optic interface (optional RLI-100 kit).
- Built-in switchable 150 kHz high-pass filter rejects mains-frequency interference when measuring the 150 kHz–30 MHz CISPR 15 band, lowering the noise floor and protecting the receiver front end.
- CISPR 15 / EN 55015 compliance testing of lighting equipment — LED bulbs, drivers, ballasts, fluorescent fixtures, and similar products; EUT placed at the approximate center of the loop structure.
- Optional ALT-930-CKIT Calibration Kit — balun-dipole transmitting antenna (per CISPR 16-1-4), mounting structure, and 10-meter RG-223/U cable for in-house calibration of the LAS.
- Individually calibrated per CISPR 16-1-4 with NIST traceability. ISO 17025 calibration available on request. Operating range 0° to 40° C, 65.5 lbs (29.7 kg). Three-year warranty.
